Wie finde ich den Speicherort von MySQL my.cnf?

Question

Gibt es einen MySQL-Befehl zum Auffinden der my.cnf Konfigurationsdatei, ähnlich wie bei PHPs phpinfo() ortet seine php.ini ?

Answer 1

Das könnte funktionieren:

strace mysql ";" 2>&1  | grep cnf

auf meinem Rechner diese Ausgaben:

stat64("/etc/my.cnf", 0xbf9faafc)       = -1 ENOENT (No such file or directory)
stat64("/etc/mysql/my.cnf", {st_mode=S_IFREG|0644, st_size=4271, ...}) = 0
open("/etc/mysql/my.cnf", O_RDONLY|O_LARGEFILE) = 3
read(3, "# /etc/mysql/my.cnf: The global "..., 4096) = 4096
stat64("/home/xxxxx/.my.cnf", 0xbf9faafc) = -1 ENOENT (No such file or directory)

Es sieht also so aus, als ob /etc/mysql/my.cnf die richtige Datei ist, da stat64() und read() erfolgreich waren.

Answer 2

Standardmäßig sucht mysql die Datei my.cnf zuerst im Ordner /etc. Wenn es in diesem Ordner keine /etc/my.cnf-Datei gibt, empfehle ich Ihnen, eine neue Datei in diesem Ordner zu erstellen, wie in der Dokumentation angegeben ( https://dev.mysql.com/doc/refman/5.6/en/option-files.html ).

Sie können auch nach einer vorhandenen my.cnf suchen, die von Ihrer mysql-Installation eingerichtet wurde. Sie können den folgenden Befehl aufrufen

sudo find / -name "*.cnf"

Sie können die folgende Konfigurationsdatei mit myisam-Tabelle und ohne innodb-Mysql-Unterstützung verwenden (aus der Port-Installation von mysql auf mac os x maverick). Bitte überprüfen Sie jeden Befehl in dieser Konfigurationsdatei.

# Example MySQL config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MySQL.
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password   = your_password
port        = 3306
socket      = /opt/local/var/run/mysql5/mysqld.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port        = 3306
socket      = /opt/local/var/run/mysql5/mysqld.sock
skip-locking
key_buffer_size = 256M
max_allowed_packet = 1M
table_open_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /opt/local/var/db/mysql5
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /opt/local/var/db/mysql5
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

Answer 3

Für Ubuntu 16: /etc/mysql/mysql.conf.d/mysqld.cnf

Answer 4

Wie von Konyak erwähnt, können Sie die Liste der Orte erhalten, an denen mysql nach Ihrem my.cnf Datei durch Ausführen von mysqladmin --help . Da dies ziemlich ausführlich ist, können Sie mit schnell zu dem Teil kommen, der Sie interessiert:

$ mysqladmin --help | grep -A1 'Default options'

Sie erhalten dann eine ähnliche Ausgabe wie diese:

Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/etc/my.cnf ~/.my.cnf

Je nachdem, wie Sie mysql installiert haben, ist es möglich, dass noch keine dieser Dateien vorhanden ist. Sie können cat um zu sehen, wie Ihre Konfiguration aufgebaut ist, und um Ihre eigene zu erstellen my.cnf bei Bedarf an dem von Ihnen gewünschten Ort.

Answer 5

Ich weiß nicht, wie Sie MySQL in Ihrer Linux-Umgebung eingerichtet haben, aber haben Sie das überprüft?

• /etc/my.cnf